Choosing the Right Garage Door Torsion Spring: Oil-Tempered, Galvanized or Powder-Coated

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician near you?

    Get in touch with A1 garage doors and help is on it's way! When it comes to fixing your garage door, better leave it to the professionals. For a FREE quote and estimate,

    CALL NOW: ☎️ (647) 249-8443

    Or, fill out this form and we will contact you shortly




    Show us the damage: Send us some photos for a FREE cost estimate.

    A1 Garage Door Repair service areas: Richmond Hill, Mississauga, Vaughan, Woodbridge and the Toronto surrounding cities.

    Scroll down to read the rest of this article titled Choosing the Right Garage Door Torsion Spring: Oil-Tempered, Galvanized or Powder-Coated.

    Your garage door springs should survive 10,000-20,000 cycles before they wear down and break, but when a garage door is “on the fritz,” it’s usually a spring’s fault. Attempting to repair or replace garage door springs can be a dangerous job, and it’s usually not worth the risk of DIY-ing. As designs have improved, however, springs have been modified to be a bit more safe.

    The two kinds of garage door springs are “extension” and “torsion,” with extension being the old version, and torsion being the new. Extension springs are typically found in older Sacramento homes and are dangerous because of the possibility they could snap free and fly apart (being under so much tension), when you attempt to remove or repair. If a torsion spring breaks, it stays attached to its torsion tube, making it more safe, and it’s easier to balance as well.

    Different Springs for Different Things

    It’s important to choose the right garage door spring for your specific garage door — the heavier the door, the heavier duty the spring must be. But there are also factors like resilience, cleanliness and maintenance to factor in. Three main options are: oil-tempered springs, galvanized springs, and powder-coated springs.

    Oil-Tempered Springs

    If your goal is to avoid frequent maintenance and repairs, an oil-tempered spring is the way to go. They are the longest lasting because of the lubricating qualities of oil, and they are quieter than galvanized and powder-coated springs. They are…

    Read more…

    Hope you enjoyed our article titled Choosing the Right Garage Door Torsion Spring: Oil-Tempered, Galvanized or Powder-Coated. Besides "Choosing the Right Garage Door Torsion Spring: Oil-Tempered, Galvanized or Powder-Coated", feel free to browse our blog for more great content. A1 Garage Doors.

    Common garage door repair related FAQ

    How long does it take to replace a garage door?

    Roughly 3 to 4 hours, if done properly.

    How often should my a garage door be serviced?

    Your garage door is a large piece of moving equipment made up of many parts. Some families use their garage door more than their front door. We recommend having your garage door and operator serviced every year in order to ensure a properly working door and operator. The noises your door or operator makes are your initial “warning signs” that something is not quite right. The longer you put off the necessary service, the more damage may result.

    How long do garage door springs usually last?

    The most common torsion springs have an expected life of about 10,000 cycles (one opening and one closing is a cycle.)

    What is the life span of a garage door opener?

    The average life span of a door opener can vary from 10 to 20 years depending on the model and usage.

    Contact Us
    Contact Us!

    Garage door repair A1

    Looking for a quick garage door repair?
    Need a routine tune-up or maintenance?

    CALL NOW: ☎️ (613) 704-7698

     

     

    We service Ajax, North York, Oakville, Richmond Hill, Pickering, Etobicoke and the wider Mississauga area.

    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar