Garage Door Parts
It’s easy to operate overhead doors. Simply click the remote, and then the door opens and closes as you wish.
Despite its simple operation, you may discover that one of the parts is malfunctioning.
This may be unfortunate and you may need to perform the necessary repairs and replacements depending on the issue. With this, look for a garage door repair company near you to ensure the job is correctly done.
Hence, we have compiled all information necessary for the different garage door parts to familiarize with. The next time you encounter door issues, you know how to specify the affected garage door parts to a professional.
The opener serves as the opening mechanism of the overhead door. It appears like a box hanging from the ceiling. Then it attaches to the cord that extends to an outlet.
The opener coordinates with the remote to make the door move. It receives a signal once you click the remote. It also contains a motor to set everything into motion.
Overhead doors don’t just rely on the opener to make the door lift and close. While the opener controls the movement of the garage door, the springs are what ease the movement.
Springs have high tension stored, and it releases when the door moves up and down. If you try to manually open the door, it’s easy to open since you’re not lifting its full weight.
When the drum rotates, it rolls up the cable. As soon as the cables pull upward, the door opens right away.
Like springs, cables are dangerous to fix, and you need a professional to perform a garage door cable repair for you.
Rollers and Tracks
Rollers and tracks keep the doors aligned.
Rollers are wheels installed at the sides of the garage door. You can see them into the metal tracks to smoothen the door’s movement.
Rollers move along the tracks when the door is moving up and down. If it starts to break, it sets the door off-track.
Hinges and Brackets
These parts connect the overall garage door system. They are fastened to the sides of the overhead door.
There are hinges in the middle of the door. So when the door opens, it allows the panels to fold while staying connected.
If there is rust and corrosion on hinges and brackets, apply a lubricant. If it loosens up, tighten it with an open wrench.
Sensors detect obstructions and signal the door to open or close it.
Sensors are placed at the bottom part of the door. They face each other and project a light beam to the lens of the other sensor. If there’s an obstruction, the sensor will not receive the light from the other. Hence, the door won’t close all the way.
The tube shaft is located above the door and holds the springs in place. It may not move, but it assists the operation of the spring.
Drums are pulley wheels connected to the ends of the tube. When the tension in the springs is released, the drums rotate, enabling the cables to move.
Garage doors don’t only move, but they also guard your house and car against rain, snow, or other external elements. That’s why a garage door should not have any gaps at the sides.
Thus, it is the purpose of a weather seal to bridge the gaps so that no elements can enter the garage. It also helps in the insulation of the doors.
Make sure to check the seals now and then and replace them when you see signs of damage. You can watch this video for the weather seal installation guide.
Emergency Release Cord
If your garage door is automated, most likely, there’s an emergency release cord hanging at the top of the opener.
You can use the cord during a power outage to open the garage. When you pull it, it allows you to open and close the door manually. Hence, whether you are inside or outside of the garage, you can open the door by pulling the cord.
Ask assistance from A1 Garage Doors!
There are many terminologies on the garage door parts, but it’s essential to know everything.
The next time you encounter problems with your garage door, you can pinpoint the source of the problem. You can also communicate your issues clearly with a professional in Mississauga.
When such problems occur on the garage door parts, don’t hesitate to call A1 Garage Doors. We offer various garage door services, whether it’s a garage door installation, repair, or replacement.
Hope you enjoyed our article titled Garage Door Parts. Besides "Garage Door Parts", feel free to browse our blog for more great content.
Common garage door repair related FAQ
How long does it take to replace a garage door?
Roughly 3 to 4 hours, if done properly.
How often should my a garage door be serviced?
Your garage door is a large piece of moving equipment made up of many parts. Some families use their garage door more than their front door. We recommend having your garage door and operator serviced every year in order to ensure a properly working door and operator. The noises your door or operator makes are your initial “warning signs” that something is not quite right. The longer you put off the necessary service, the more damage may result.
How long do garage door springs usually last?
The most common torsion springs have an expected life of about 10,000 cycles (one opening and one closing is a cycle.)
What is the life span of a garage door opener?
The average life span of a door opener can vary from 10 to 20 years depending on the model and usage.