How Does A Garage Door Spring Break/ A fully-functional garage door is vital to the safety of your house and your belongings.
It is also convenient since you can move your car in and out of the garage.
What’s more, you can store the garage with your tools and equipment.
However, all good things come to last. Overhead doors can get damaged or broken.
If you find your door snaps suddenly, or it won’t open, your garage door spring is likely the culprit.
I know you’re wondering why your spring is damaged.
That’s why we suggest you read this guide to understand how a garage door spring breaks.
Reasons why garage door springs break
Springs are responsible for holding the tension on your garage door.
The tension allows for the opening and closing of your garage door.
If it breaks, it won’t be easy to open or close your garage door.
What’s more, it can contribute to more damage to other parts such as tracks, hardware, and cable.
Meanwhile, these are the reasons how a garage doors spring break:
Wear and Tear
The biggest reason why a spring gets damaged is that it’s worn-out.
The springs last for about 10,000 cycles or approximately seven years.
That may seem like a lot, but compared to the lifespan of your garage door, it’s relatively short.
After all, overhead doors last for 10 to 15 years.
If you have been using your garage door many times in a day, you’ll risk your spring to damage.
Hence, it results in breakage and can cause injury to you and your loved ones.
If rust starts to appear in your garage door spring, then it causes damage.
Rust causes friction on the coils while the door is in operation.
Besides, the corroded springs will lead to the failure of the operation of your garage door.
To prevent this, lubricate the spring three to four times a year with a silicon-based or lithium-based lubricant.
By doing this, you’re extending the life of your spring.
It’s common knowledge that garage doors will eventually fail if you do not maintain it regularly.
Maintenance can increase the lifespan of your garage door, including its parts and components.
You can also avoid unnecessary repairs because you have been taking care of your garage door very well.
Regarding the springs, make sure to check if you see signs of damage or rust.
Hence, you need to lubricate it to allow for a smoother and quieter operation on your garage door.
However, if springs need a replacement, you can always call for a garage door repair company near you to replace it for you.
Furthermore, you can also check the balance to see if your spring is failing:
2. Pull down the emergency release cord to open the door manually.
3. Open the door halfway and release it. If your door does not move from its position, then your springs are in good working condition.
On the other hand, the springs start to show signs of damage and may need a repair or a replacement if it sags.
If you have purchased the wrong springs for your garage door, sooner or later, it will likely fail.
You should consider the spring length and size according to the type of garage door.
A typical garage door should have two torsion springs on both sides.
Some use one long spring, but it is only applicable for lighter doors.
It is best to use two springs to distribute the weight load and tension to the garage door’s movement.
Failure to do this can cause massive damage to your door.
Furthermore, check this video for more tips on how to choose the right spring for your door.
Also, the best way to do it is to consult a professional.
If you rely on A1 garage doors, you’ll surely get the right pair of springs suited for your door. Also, we will install it for you.
Leave it to the pros
Wrapping it up, these are the reasons on how a garage door spring breaks.
Some may be simple and you may have the skills to repair them yourself.
However, if the tough jobs get tougher and dangerous, you have still one last option left—and it’s the best one.
It’s safer to leave the job to a qualified professional garage door company such as A1 Garage Doors.
For damaged springs, we recommend doing a complete garage door springs replacement.
It’s best to avoid DIY fixes, which can cause unnecessary accidents and injuries to you.
If you live in Mississauga, call us now to witness how we give the best quality service for you.
Hope you enjoyed our article titled How Does A Garage Door Spring Break. Besides "How Does A Garage Door Spring Break", feel free to browse our blog for more great content.
Common garage door repair related FAQ
How long does it take to replace a garage door?
Roughly 3 to 4 hours, if done properly.
How often should my a garage door be serviced?
Your garage door is a large piece of moving equipment made up of many parts. Some families use their garage door more than their front door. We recommend having your garage door and operator serviced every year in order to ensure a properly working door and operator. The noises your door or operator makes are your initial “warning signs” that something is not quite right. The longer you put off the necessary service, the more damage may result.
How long do garage door springs usually last?
The most common torsion springs have an expected life of about 10,000 cycles (one opening and one closing is a cycle.)
What is the life span of a garage door opener?
The average life span of a door opener can vary from 10 to 20 years depending on the model and usage.