Sensors on overhead doors are safety devices that detect obstruction in its line of sight.
Once it detects an obstacle in the doorway, it prevents the door from closing.
Sensors are positioned at each side of the garage door. It produces a low-voltage beam when the overhead door activates.
When you see problems with your garage door, you need to pay attention to your sensors.
Troubleshooting the sensor can be done on your own. But before you begin, make sure to plug in the sensor to turn it on.
Also, your sensors might need a bit of cleaning or an adjustment.
Whatever your sensors need to operate again, there are several ways you can do to fix it.
But if you’re hesitant about doing the job by yourself, you can always count on A1 Garage Doors to do the repairs for you.
Meanwhile, this guide will help you spot the damage and how to fix a broken garage door sensor.
Ways to Fix a Faulty Garage Door Sensor
If you think your garage door sensors are malfunctioning, you can troubleshoot it by identifying the root cause.
These are the few signs you can spot to determine a faulty sensor.
This will help you identify if you can fix it yourself or need help from a garage door repair company near you.
LED light indicators: Check the light blinks on your sensors when you try to close the overhead door. By checking it, you can tell if it’s out of alignment.
If you see green lights, the sensors are working. On the other hand, red light means your sensors are not aligned.
If you see red lights, check the bracket or try tightening a screw on the sensor.
Once you execute one of the methods, you know you have fixed the problem if the light stops blinking and the door is operating normally again.
Dirty sensor lenses: If you see your sensors are dirty, the dirt can block the sensors’ view. Hence, it won’t function normally.
Wipe the lenses to remove the dirt and test your sensors if the door functions normally.
Make sure to clean the sensors regularly to prevent garage door issues from happening.
Damaged wires: Wires are responsible for the operation of your garage door sensors.
However, it is also susceptible to wear and tear due to usage, weather factors, and pests.
External factors such as rain, wind, and pest infestations can affect the wires.
Inspect the wires if it’s damaged due to exposure to water or if there are signs of tampering.
If so, you can follow these steps to check if the wires are faulty.
However, make sure you have the skills and experience to perform the job on how to fix a broken garage door sensor wire.
- Remove the overhead door sensors from the brackets.
- Cut the wires 12 inches from the sensors or simply remove the nuts’ sensor wires.
- Detach the ends of wires from the sensors.
- Twist the colored wires together.
- Bring the sensors to your opener motor unit.
- Separate the wires from the grey and white terminals located at the back of the operator.
- Slide the white wires into the white terminal.
- Repeat step 7 for the white and black stripes and grey terminal.
- Face the sensors at each other. If both lights turn on, the wiring is most likely the issue. With this, replace the wires immediately.
However, if the light does not turn on, then replace your sensors. You can watch out this video for the replacement of sensors.
A sensor replacement is relatively easy to do. However, you need a highly-skilled technician to do it successfully.
With this, you can call a residential or a commercial garage door repair company in Mississauga.
Team Up with A1 Garage Doors!
We at A1 Garage Doors provide residential and commercial garage door repairs in Mississauga.
If you need us, call us, and we’ll respond to your concerns right away.
We also provide 24 7 garage door repairs because we know problems may arise at any time of the day.
We’re a reliable garage door repair company for 12 years and serve Mississauga with high-quality service.
Don’t prolong your agony, and call us to fix your overhead doors.
Hope you enjoyed our article titled How To Fix A Broken Garage Door Sensor. Besides "How To Fix A Broken Garage Door Sensor", feel free to browse our blog for more great content. A1 Garage Doors.
Common garage door repair related FAQ
How long does it take to replace a garage door?
Roughly 3 to 4 hours, if done properly.
How often should my a garage door be serviced?
Your garage door is a large piece of moving equipment made up of many parts. Some families use their garage door more than their front door. We recommend having your garage door and operator serviced every year in order to ensure a properly working door and operator. The noises your door or operator makes are your initial “warning signs” that something is not quite right. The longer you put off the necessary service, the more damage may result.
How long do garage door springs usually last?
The most common torsion springs have an expected life of about 10,000 cycles (one opening and one closing is a cycle.)
What is the life span of a garage door opener?
The average life span of a door opener can vary from 10 to 20 years depending on the model and usage.