What’s Wrong With Your Garage Door Track? – Garage doors are used every day, rolled upright or sideways, on an average of four times a day.
These become more prone to damages because of continuous usage.
It should be maintained and have tune-ups periodically to ensure that you would not have problems in the future.
However, most of the time, homeowners do not look into the condition of their garage doors regularly.
They do not tend to think about this as long as they can open their garage doors.
They would not notice it until there is something wrong with the doors. Therefore, they are not aware of the components and possible problems or glitches of their garage door.
When the garage doors stop working, homeowners will be stressed and wonder what is wrong with their entries.
You must learn the necessary parts of a garage door and the common dilemmas that you may encounter with having one.
For homeowners, living in Mississauga, Oshawa, Vaughan, and Woodbridge, here is the guide in owning your garage doors.
Reasons why your garage door is not working
A garage door is composed of the door, cables, coil springs, brackets, and rollers.
Automatic garage doors have motors and a garage door opener, which is the controller that activates the garage door to open and close automatically by itself.
You can also find a rubber seal on your garage door.
This seal is what prevents rain from seeping through into your garage.
When you encounter problems with your garage doors, it is most likely there is a problem with its parts.
Look into the frequent issues that stop your garage doors from working:
Springs are damaged
If your garage door is difficult to pull down or push up, it signifies that there are damaged springs. Garage door springs’ lifespan is about thirteen years.
If you think you have opened and closed your garage door for about ten thousand times, you should also expect that the springs are worn out and need replacement.
It has too much friction
You might experience that you can’t open your garage door, or it is hard to open it.
It could be because of the friction caused by rust or dryness.
Friction makes the springs, cables and rollers have a hard time to move smoothly and causes the garage door not to function.
You put oil or grease to lubricate these parts and prevent them from becoming dry or rusty.
This step can also prevent you from needing a replacement for these components.
There are leaks
When it rains, and the water is entering your garage, it is because of broken garage door seals.
The rubber might be weak and crumbling and cannot stop the water from coming in anymore and needs a replacement.
Problems with adjustments
The usual reason why your garage door is not opening or closing is because the springs or cables need adjustments.
Maybe you need to tighten or loosen the springs to open and close the door more smoothly.
There might be something that hinders the cables and chains from rolling through the rails.
Make sure nothing is sticking out along the wires.
If ever you see your garage door rolling down or up unevenly, this also means that your garage door needs some adjustments.
You will have to realign it. Readjusting the antennas for automatic garage doors might be necessary as well if your remote does not function.
Automatic garage doors have sensors for the mechanism to signal when to stop when opening and closing the door.
There are times where the sensors are blocked, or it senses an object it would hinder the doors from moving.
Make sure to clean the sensors and that no random items are lying around near the garage door’s surroundings.
If the doors are still not moving despite cleaning the area and the sensors, it means there is a technical problem.
You might need to readjust the sensors or replace it.
Lack of power
The power source can be the culprit of why your garage doors are not working. Manual garage doors do not need electrical power to work; it just requires human effort.
However, for the automatic garage doors, they are dependent on electricity.
The remotes as well need batteries to function.